GPS/Glonass active antenna for timing and synchronization Immunity to noise and interference. With lightning protection High reliability in harsh environments Mounting bracket included for wall and pole installation. N female connector
Specifications :
Output voltage: 220/250V.
Output current: 16A.
Certificates: CE and RoHS.
8 x Schuko plugs with double grounding.
Plugs with a 45º angle.
2 metal fixings for mounting in 19" cabinets.
Cable length: 2m (H0 Guage HO5VV-F3Gx1.5 mm²).
Not Included: Screws
Universal fixed guide for adjustable equipment support (Pair). It is a system of guides with fixed anchorage but adjustable using a telescopic system to adapt the depth measurement from 600 to 800mm.
Guides to support equipment on the four 19″ profiles mounted laterally, assembly with cage nuts to support trays or equipment, the assembly will be carried out on the guides themselves for Bottom Racks 600-800-1000
Modular quick assembly and disassembly system with sectionable 'clip' and separated by micro-cut system. The panels install in seconds without the need for screws or tools.
Box for electrical elements mounted on DIN rail in 19” and 21” formats in 3 height units. It can house circuit breakers, differentials, terminal blocks, etc., all on rails, 11 bipolar and 22 unipolar elements.
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
Trays to support equipment on guides mounted on the side of the profiles, the trays are ventilated for air circulation for proper cooling, these trays can be mounted on our rack models,
Diplexer, DCS 1800/UMTS 2100, AISG protocol compatible, DC pass on UMTS port. DIN7/16" connector
PORT 2 1710-1880MHz
Port 1 1920-2170MHz
DCS 1800, Band Pass IMT 2100, Band Pass
Wall rack in 19″ format, two bodies with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles. Both sides are accessible.
Wall rack in 19″ format with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles, with access from both sides .
Jumper cable 1/4" Superflex with connectors, 4.3-10 male straight on one end and NEX10 male straight on the other end. Type of PE cover, Length 2 meters
• Mid-rise and long-sleeved design
• Dissipative fabric made with a mixture of 43% Polyester, 50% Cotton and 7% Carbon yarn
• Conductive cuffs
• Light, breathable and comfortable
• Unisex sizes
• Machine washable up to 40ºC
• Weight 270 g/m2
• ESD symbol on one sleeve
• Mid-rise and long-sleeved design
• Zipper closure up to the neck
• Dissipative fabric made with a mixture of 43% Polyester,
50% Cotton and 7% Carbon yarn
• Conductive cuffs
• Light, breathable and comfortable
• Unisex sizes
• Machine washable up to 40ºC
• Weight 290 g/m2
• ESD symbol on one sleeve
• Mid-rise and long-sleeved design
• Zipper closure up to the neck
• Dissipative fabric made with a mixture of 43% Polyester,
50% Cotton and 7% Carbon yarn
• Conductive cuffs
• Light, breathable and comfortable
• Unisex sizes
• Machine washable up to 40ºC
• Weight 290 g/m2
• ESD symbol on one sleeve
Multi-purpose communications rack with front glass door, perforated rear and accessible sides that allows a wide range of possibilities such as:
Changes doors with openings from right to left or left to right without the need for tools for this purpose,
Floor, ceiling, rear, top and bottom wiring entry for future cabling growth in stations or Data...
• Static dissipative fabric
blue/black: 47% polyester, 50% cotton, 3% carbon thread
grey: 47% polyester, 50% cotton, 3% carbon yarn
• light, breathable and comfortable
• UNISEX size
• Long or short sleeve
• Machine washable up to 40º C
• Weight 210 g/m2.
• Top pocket with ESD logo