Beginning
€30.23
ROXTEC module or plug model RM40 10-32 for 1/2"-7/8" cables
€55.00
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
Jumpers
F4A-HMHM-4M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 4M
Andrew
Ref.: F4A-HMHM-4M-P
€28.68
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 4 m
Tightening wrench
Torque wrench for 7/8" EZfit® connectors, 34 mm - Ref TW-78-EZFC
Andrew
Ref.: TW-78-EZFC
€93.88
Torque wrench for EZfit® connectors for 7/8" cable. 34mm opening. Tightening torque 34.001 Nm / 300.93 in lb
€20.00
DIN rail in 19 “format for rail mounting of electrical elements.
Jumpers
F4A-HMHM-5M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 5M
Andrew
Ref.: F4A-HMHM-5M-P
€31.84
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 5 m
RosenbergerHSD®
RosenbergerHSD Male Angled PCB Connector - D4S20G-400A5-Z
Rosenberger
Ref.: D4S20G-400A5-Z
€7.10
RosenbergerHSD male 90º angled PCB connector, wave solder, neutral housing, Waterblue color
€30.00
7/8" manual cable preparation tool (AVA5-50 and AVA5-50FX). Not suitable for EZFit connectors.
€65.00
Box for electrical elements mounted on DIN rail in 19” and 21” formats in 3 height units. It can house circuit breakers, differentials, terminal blocks, etc., all on rails, 11 bipolar and 22 unipolar elements.
€5.20
30Cold Shrink Sleeve 200mm, MinØ10mm, AØ-40mm
€2.00
Flexible low loss coaxial cable, 50 Ohm, tinned copper braided mesh with 90% coverage, non-halogenated polyolefin flame retardant black jacket. Solid copper conductor wire and shielding with aluminum tape.
Jumpers
F4A-HMHR-3M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male straight/male elbow 3M
Andrew
Ref.: F4A-HMHR-3M-P
€30.10
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM with connectors 4.3-10 Male Straight to 4.3-10 Male Angled, 3 m
€11.28
UTP Female RJ45 Connector, KJ Series Keystone Modular Jack 8 Position, Category 6, Unshielded
€5.25
Modular quick assembly and disassembly system with sectionable 'clip' and separated by micro-cut system. The panels install in seconds without the need for screws or tools.
Installation Accessories
Stainless steel triple clip for 1/2"R cable, SLCC131-C03
Rosenberger
Ref.: SLCC1X1-C03
€2.77
Triple stainless steel clamp for 1/2"R cables, with "C-clamp" type gripper and M8 screws
€10.91
TNC 50 Ohm male angled coaxial connector for cables type RG 142, RG223, RG400 (ø5.4-50 Ohm). Solder-crimp type assembly.
Jumpers
F4A-HMHR-5M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male straight/male angled 5M
Andrew
Ref.: F4A-HMHR-5M-P
€38.02
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM with connectors 4.3-10 Male Straight to 4.3-10 Male Angled, 5 m
€5.25
Straight female SMP coaxial connector for RG 316-d cable, K 02252d, HF50 0.5/1.5LDY (ø3.1-50 Ohm), mounting type: Full Crimp
Installation Accessories
HELIAX® FiberFeed® weatherproof protector, FA-FWS-E-1C
Andrew
Ref.: FA-FWS-E-1C
€29.55
HELIAX® FiberFeed® weather cable protector compatible with Ericsson fiber antenna interface, UL94 V0, PPS material, with dust cap
€407.88
Cell-Max™ Low PIM Directive Outdoor Antenna, 698–960 MHz and 1710–2700 MHz, 4.3-10 connectorization
€5.75
Straight female SMP coaxial connector for RG 178, 196 cable (ø2.0-50 Ohm), mounting type: Full Crimp
€12.00
Aeration Covers for front closure with ventilation from 1U to 6U in height.
€33.00
RET control cable, connector A: DIN female 8-pin straight according to IEC 60130-9, connector B: DIN male 8-pin straight according to IEC 60130-9, AISG 1.1 // AISG 2.0 protocol. 3 meters
€18.90
Lifting mesh valid for 7/8" cable, 77 elliptical waveguide, and hybrid cables