Beginning
€55.00
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
Jumpers
F4A-HMHM-4M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 4M
Andrew
Ref.: F4A-HMHM-4M-P
€28.68
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 4 m
Tightening wrench
Torque wrench for 7/8" EZfit® connectors, 34 mm - Ref TW-78-EZFC
Andrew
Ref.: TW-78-EZFC
€93.88
Torque wrench for EZfit® connectors for 7/8" cable. 34mm opening. Tightening torque 34.001 Nm / 300.93 in lb
€20.00
DIN rail in 19 “format for rail mounting of electrical elements.
Jumpers
F4A-HMHM-5M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 5M
Andrew
Ref.: F4A-HMHM-5M-P
€31.84
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 5 m
RosenbergerHSD®
RosenbergerHSD Male Angled PCB Connector - D4S20G-400A5-Z
Rosenberger
Ref.: D4S20G-400A5-Z
€7.10
RosenbergerHSD male 90º angled PCB connector, wave solder, neutral housing, Waterblue color
€30.00
7/8" manual cable preparation tool (AVA5-50 and AVA5-50FX). Not suitable for EZFit connectors.
€65.00
Box for electrical elements mounted on DIN rail in 19” and 21” formats in 3 height units. It can house circuit breakers, differentials, terminal blocks, etc., all on rails, 11 bipolar and 22 unipolar elements.
€5.20
30Cold Shrink Sleeve 200mm, MinØ10mm, AØ-40mm
€2.00
Flexible low loss coaxial cable, 50 Ohm, tinned copper braided mesh with 90% coverage, non-halogenated polyolefin flame retardant black jacket. Solid copper conductor wire and shielding with aluminum tape.
Jumpers
F4A-HMHR-3M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male straight/male elbow 3M
Andrew
Ref.: F4A-HMHR-3M-P
€30.10
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM with connectors 4.3-10 Male Straight to 4.3-10 Male Angled, 3 m
€11.28
UTP Female RJ45 Connector, KJ Series Keystone Modular Jack 8 Position, Category 6, Unshielded
€5.25
Modular quick assembly and disassembly system with sectionable 'clip' and separated by micro-cut system. The panels install in seconds without the need for screws or tools.
Installation Accessories
Stainless steel triple clip for 1/2"R cable, SLCC131-C03
Rosenberger
Ref.: SLCC1X1-C03
€2.77
Triple stainless steel clamp for 1/2"R cables, with "C-clamp" type gripper and M8 screws
€10.91
TNC 50 Ohm male angled coaxial connector for cables type RG 142, RG223, RG400 (ø5.4-50 Ohm). Solder-crimp type assembly.
Jumpers
F4A-HMHR-5M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male straight/male angled 5M
Andrew
Ref.: F4A-HMHR-5M-P
€38.02
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM with connectors 4.3-10 Male Straight to 4.3-10 Male Angled, 5 m
€5.25
Straight female SMP coaxial connector for RG 316-d cable, K 02252d, HF50 0.5/1.5LDY (ø3.1-50 Ohm), mounting type: Full Crimp
Installation Accessories
HELIAX® FiberFeed® weatherproof protector, FA-FWS-E-1C
Andrew
Ref.: FA-FWS-E-1C
€29.55
HELIAX® FiberFeed® weather cable protector compatible with Ericsson fiber antenna interface, UL94 V0, PPS material, with dust cap
€407.88
Cell-Max™ Low PIM Directive Outdoor Antenna, 698–960 MHz and 1710–2700 MHz, 4.3-10 connectorization
€5.75
Straight female SMP coaxial connector for RG 178, 196 cable (ø2.0-50 Ohm), mounting type: Full Crimp
€12.00
Aeration Covers for front closure with ventilation from 1U to 6U in height.
€33.00
RET control cable, connector A: DIN female 8-pin straight according to IEC 60130-9, connector B: DIN male 8-pin straight according to IEC 60130-9, AISG 1.1 // AISG 2.0 protocol. 3 meters
€18.90
Lifting mesh valid for 7/8" cable, 77 elliptical waveguide, and hybrid cables
€19.00
Guides to support equipment on the four 19″ profiles mounted laterally, assembly with cage nuts to support trays or equipment, the assembly will be carried out on the guides themselves for Bottom Racks 600-800-1000