Markets
€146.00
Continuous bracelet grounding monitor with a 10 mm clasp
Operation with 9Vdc battery
Audible and visible
Sucko ground connection plug.
Test method: capacitive impedance measurement
Test range: 1M ohm ...(100 pF + 2 MOhm) OK
HI-Fail > 5 Mohm
LO-Fail < 400 kohm
€136.77
Continuous bracelet grounding monitor with a 10 mm clasp
Operation with 9Vdc battery
Audible and visible
Test method: capacitive impedance measurement
Test range: 1M ohm ...(100 pF + 2 MOhm) OK
HI-Fail > 5 Mohm
LO-Fail < 400 kohm
€79.78
2-way splitter, low power and reduced format. N female connectorization. Ultra extended frequency: 555 – 6000 MHz
Network electronics
34060365 Huawei optical transceiver, eSFP, 850nm, 4.25G multi-rate, -9dBm~-1.5dBm,...
Huawei
Ref.: 34060365
€26.00
Original Huawei SFP 4.25 Gb/s OBSAI, CPRI and LTE transceiver for 850nM multimode fiber optics, 300 meters, dual LC/PC connector, DDM/DOM Operating temperature range: -40/85ºC
Jumpers
Jumper SureFlex® 1/4"S connector NEX10 Male to 4.3- 10 Male, 2m - F1A-XMHM-2M-P
Andrew
Ref.: F1A-XMHM-2M-P
€40.89
Jumper SureFlex® 1/4" Superflexible cable with NEX10 male straight to 4.3-10 male straight connectors, Length 2 Meters
Wi-Fi
Omni Wi-Fi antenna 2.4/5 GHz 6dBi 4 x RPTNC male, M6025040O3D402MWL
Ventev
Ref.: M6025040O3D402MWL
€183.48
Ventev TerraWave 2.4/5 GHz 2.5/4 dBi Outdoor Multi-Input Multiple-Output (MIMO) Small Form Factor Omnidirectional Wi-Fi Antenna with Long Threaded Ferrule. Designed to work with the latest Cisco 802.11ac Waves I and II WLAN access points. The antenna's small size and clean appearance, combined with excellent performance, make it ideal for deployments...
€60.73
HELIAX® FTTA fiber optic cable, 2 single-mode fibers, 5 mm LSZH armored cable. Connector 1 Duplex LC, Connector 2 Duplex LC, L=50 meters
GPS
GPS/GLONASS active antenna 1559 MHz- 1610.5MHz p/nGPSGLONASS-36-N-GA
Rosenberger
Ref.: GPSGLONASS-36-N-GA
€94.50
GPS/Glonass active antenna for timing and synchronization Immunity to noise and interference. With lightning protection High reliability in harsh environments Mounting bracket included for wall and pole installation. N female connector
€7.50
Product color: Black
Package width: 490mm
Package depth: 80mm
Package weight: 340g
Package volume: 1960 cm³
€17.18
Specifications :
Output voltage: 220/250V.
Output current: 16A.
Certificates: CE and RoHS.
8 x Schuko plugs with double grounding.
Plugs with a 45º angle.
2 metal fixings for mounting in 19" cabinets.
Cable length: 2m (H0 Guage HO5VV-F3Gx1.5 mm²).
Not Included: Screws
€30.00
Universal fixed guide for adjustable equipment support (Pair). It is a system of guides with fixed anchorage but adjustable using a telescopic system to adapt the depth measurement from 600 to 800mm.
€19.00
Guides to support equipment on the four 19″ profiles mounted laterally, assembly with cage nuts to support trays or equipment, the assembly will be carried out on the guides themselves for Bottom Racks 600-800-1000
€12.00
Aeration Covers for front closure with ventilation from 1U to 6U in height.
€5.25
Modular quick assembly and disassembly system with sectionable 'clip' and separated by micro-cut system. The panels install in seconds without the need for screws or tools.
€20.00
DIN rail in 19 “format for rail mounting of electrical elements.
€55.00
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
€27.00
Front fixing equipment support trays at 19" in 2U height, available in 300 mm and 400 mm depths. They are ventilated and are universal in size, supporting up to 30Kg of weight. They can be mounted in any cabinet on the market.
€50.00
Trays to support equipment on guides mounted on the side of the profiles, the trays are ventilated for air circulation for proper cooling, these trays can be mounted on our rack models,
€22.64
HELIAX® FTTA fiber optic cable, 2 single-mode fibers, 5 mm LSZH armored cable. Connector 1 Duplex LC, Connector 2 Duplex LC, Length: 10 meters
€227.50
Wall rack in 19″ format, two bodies with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles. Both sides are accessible.
€144.63
Wall rack in 19″ format with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles, with access from both sides .
Jumpers
Jumper cable 1/4" Superflex, 4.3-10 male to NEX10 male 2M - SLJ14SP-64M89M-2.0M-00
Rosenberger
Ref.: SLJ14SP-64M89M-2.0M-00
€21.45
Jumper cable 1/4" Superflex with connectors, 4.3-10 male straight on one end and NEX10 male straight on the other end. Type of PE cover, Length 2 meters
€475.21
Multi-purpose communications rack with front glass door, perforated rear and accessible sides that allows a wide range of possibilities such as:
Changes doors with openings from right to left or left to right without the need for tools for this purpose,
Floor, ceiling, rear, top and bottom wiring entry for future cabling growth in stations or Data...
€6.90
N (50 Ohm) female/panel female adapter, with 4-hole flange
€53.12
High power splitter, two way, ultra-wide band 555– 6000 MHz, low PIM, (Additional hardware sold separately under reference 42396A-17
€83.00
MEASUREMENTS: 620 x 420 x 160 mm (L x A x H)
• Strong and durable frame made of conductive polypropylene
• Designed for the transport of stackable containers (1 x 600x400 mm or 2 x 400x300 mm)
• Includes 4 swivel wheels of 100 mm diameter, 2 of them with brakes
• Smooth and quiet operation
• Supported weight of up to 125 kg with the load evenly...
€112.92
• Variable height of stackable frames
• Frames with 4 corner hinges
• PS conductive material with graphite
• Dimensions: 1200x800x200mm
• Weight: 5.2Kg approx.
• Marked with ESD symbol
• Valid for transport pallets 5395.PAL AND 5395.800
€148.62
• Dimensions: 1200x 800x 155mm
• Made of black conductive polypropylene (with graphite)
• Euro pallet 1200 x 800mm
• Maximum static load of 7500Kg
• Dynamic load of 2500Kg
• Smooth surface with frame, valid for stackable sides 5395.AR
• Weight approx. 15Kg
• ESD symbol
• Shelf load: 500 kg
€132.69
132• Permanent, conductive polypropylene, carbon lined
• The pallet can be reinforced with 3 galvanized metal bars
• Europallet measurements 1200 x 800 x 150 mm
• Static load up to 4000 kg
• Dynamic load up to 1000 kg
• ESD symbol
• Stackable
• Weight: 11 kg
• 7mm frame
• Shelf load without bar reinforcement: 400 kg, with bars: 800 kg
€53.08
• Made of conductive polypropylene with permanent carbon charge.
• Half euro pallet with size 800 x 600 x 150 mm
• Perforated support surface
• Stackable
• 3 rows of studs
• Dynamic load up to 400 kg
• Static load up to 800 kg
• Weight 3.8 kg
• ESD symbol
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5425.0253.0353.PE
Wolfgang Warmbier
Ref.: 5425.0253.0353.PE
€3.83
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5425.0353.0553.PE
Wolfgang Warmbier
Ref.: 5425.0353.0553.PE
€5.25
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5401.0353
Wolfgang Warmbier
Ref.: 5401.0353
€2.83
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5401.0253
Wolfgang Warmbier
Ref.: 5401.0253
€1.78
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
NEWBOX stackable boxes
KIT of dividers for conductive boxes 5420.G2.80
Wolfgang Warmbier
Ref.: 5420.G2.80
€33.08
• Permanent conductive polypropylene
• For standard 600x400mm stackable boxes
• Criss-cross comb shape
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
• Custom configurable