Shopping Cart
There are no more items in your cart
Beginning
€2,835.00
Andrew Dual Repeater 800/900Mhz, Power: 21dBm Dual, Gain: 80dB
€475.21
Multi-purpose communications rack with front glass door, perforated rear and accessible sides that allows a wide range of possibilities such as:
Changes doors with openings from right to left or left to right without the need for tools for this purpose,
Floor, ceiling, rear, top and bottom wiring entry for future cabling growth in stations or Data...
€105.26
DC Block, Dual Band 650–2700 MHz, with DIN 7/16" Female to DIN 7/16" Male interface
€144.63
Wall rack in 19″ format with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles, with access from both sides .
€1,769.23
4-port sector antenna, single band 4x 694–960 MHz, 65° HPBW, 2x RET
€6.45
7/8"R Cable - AVA5-50FX, HELIAX® Andrew Virtual Air™, Corrugated copper coaxial cable, PE jacket (halogen free, non-flame retardant)
€227.50
Wall rack in 19″ format, two bodies with profiles that can be moved in depth to accommodate electronics and panels fixed on the front profiles. Both sides are accessible.
Jumpers
F4A-HMHM-2M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 2M
Andrew
Ref.: F4A-HMHM-2M-P
€13.54
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 2 m
€223.08
Diplexer, 380–960 MHz/1695–2690 MHz, DC Pass on all ports, with 4.3-10 connector. Includes installation hardware
Installation Accessories
90º double hole terminal 1/4" AWG2 (for 35mm2 cable) LCD2-14AF-Q
Panduit
Ref.: LCD2-14AF-Q
€9.55
90º angled terminal with two 1/4" holes, for cable section #2 AWG wire, distance between holes 63 inches
€50.00
Trays to support equipment on guides mounted on the side of the profiles, the trays are ventilated for air circulation for proper cooling, these trays can be mounted on our rack models,
€77.32
Torque wrench for N connectors, size 13/16", Tightening torque: 2.26 Nm / 20 in lb
Jumpers
F4A-HMHM-3M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 3M
Andrew
Ref.: F4A-HMHM-3M-P
€15.57
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 1 m
Jumpers
F4A-HMHM-1M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 1M
Andrew
Ref.: F4A-HMHM-1M-P
€16.98
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 3 m
€55.85
Cell-Max™ Omni Antenna for Indoor Coverage, 698–960 MHz, 1695–2700 MHz and 3100-4200MHz
€30.23
ROXTEC module or plug model RM40 10-32 for 1/2"-7/8" cables
€55.00
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
Jumpers
F4A-HMHM-4M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 4M
Andrew
Ref.: F4A-HMHM-4M-P
€28.68
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 4 m
Tightening wrench
Torque wrench for 7/8" EZfit® connectors, 34 mm - Ref TW-78-EZFC
Andrew
Ref.: TW-78-EZFC
€93.88
Torque wrench for EZfit® connectors for 7/8" cable. 34mm opening. Tightening torque 34.001 Nm / 300.93 in lb
€20.00
DIN rail in 19 “format for rail mounting of electrical elements.
Jumpers
F4A-HMHM-5M-P Jumper Heliax® SureFlex® 1/2" superflex 4.3-10 male/male 5M
Andrew
Ref.: F4A-HMHM-5M-P
€31.84
HELIAX® Jumper 1/2" Superflexible SureFlex® Low PIM value with 4.3-10 Male to 4.3-10 Male connectors, 5 m
€30.00
7/8" manual cable preparation tool (AVA5-50 and AVA5-50FX). Not suitable for EZFit connectors.
€65.00
Box for electrical elements mounted on DIN rail in 19” and 21” formats in 3 height units. It can house circuit breakers, differentials, terminal blocks, etc., all on rails, 11 bipolar and 22 unipolar elements.