Installation Accessories
Active filters
€7.48
Ground Kit for 7/8" cable
€30.23
ROXTEC module or plug model RM40 10-32 for 1/2"-7/8" cables
€18.90
Lifting mesh valid for 7/8" cable, 77 elliptical waveguide, and hybrid cables
€8.02
Ground Kit, SureGround®, for 1/2" coaxial cable
€5.20
30Cold Shrink Sleeve 200mm, MinØ10mm, AØ-40mm
Installation Accessories
Stainless steel triple clip for 1/2"R cable, SLCC131-C03
Rosenberger
Ref.: SLCC1X1-C03
€2.77
Triple stainless steel clamp for 1/2"R cables, with "C-clamp" type gripper and M8 screws
Installation Accessories
HELIAX® FiberFeed® weatherproof protector, FA-FWS-E-1C
Andrew
Ref.: FA-FWS-E-1C
€29.55
HELIAX® FiberFeed® weather cable protector compatible with Ericsson fiber antenna interface, UL94 V0, PPS material, with dust cap
€22.06
RET AISG 2.0 control cable with D-Sub, DB9 to 8-pin circular connector, exterior, halogen-free 1 m
€27.50
RET AISG 2.0 control cable with D-Sub, DB9 to 8-pin circular connector, exterior, halogen-free 2 m
€26.69
RET AISG 2.0 control cable with D-Sub, DB9 to 8-pin circular connector, exterior, halogen-free 3 m
€40.41
RET AISG 2.0 control cable with D-Sub, DB9 to 8-pin circular connector, exterior, halogen-free 10 m
€64.00
RET AISG 2.0 control cable with D-Sub, DB9 to 8-pin circular connector, exterior, halogen-free 15 m
€11.31
Click-on type clamp for two 9–12 mm coaxial cables, it has a central hole for the passage of an M8 stud. The package contains 10 units
€8.55
Universal ground kit for coaxial cables from 1/4" to 5/8".
€11.65
Roxtec multidiameter RM-20 module. 0+4-14.5mm for bulkhead systems.
Roxtec RM modules measure 60 mm (2.362") deep and easily accommodate cables and pipes of different sizes. When used with a solid center core, the module serves as a capacity reserve module for the future.
Wall bushings
Roxtec compression module, Wedge 120mm galvanized, p/n: ARW0001201018
Roxtec
Ref.: ARW0001201018
€159.10
Wedge 120mm compression module for Roxtec wall pass-through frames. It requires separator plates and plugs so that once inserted in its frame, it can expand through this compression module and thus provide the necessary tightness.
€53.22
M10 Angle adapter tapped hole, grip clamp made of stainless steel. two holes (package of 10 units)
RET leads
RET Cable, outdoor, halogen free - AISG 2.0 - 3mts, L99-C197-3000
Rosenberger
Ref.: L99-C197-3000
€47.20
AISG 2.0 Compliant RET Control Cable Feeds Data & DC Power to RET Components RoHS Compliant Halogen Free
RET leads
RET Cable, outdoor, halogen free - AISG 2.0 - 15mts, L99-C197-15000
Rosenberger
Ref.: L99-C197-15000
€104.20
AISG 2.0 Compliant RET Control Cable Feeds Data & DC Power to RET Components RoHS Compliant Halogen Free. 15 meter long
Grounding Kits
SureGround® Grounding Kit for 1-1/4 in coaxial cable, SG114-06B2A
Andrew
Ref.: SG114-06B2A
€7.68
Herramientas
Torque Wrench for coupling torque of 7-16 DIN connectors, 1-1/4 in opening, 244377
Andrew
Ref.: 244377
€71.14
Torque wrench for DIN 7/16" connectors, 32mm opening. (to tighten Male-Female interface) Torque value 25-30 N/m
Hardware and metallic structures
Straight support with "U" profile, 500mm Zinc + RPR, 49540
Televes
Ref.: 2404
€12.15
Straight U-profile support for wall mast installation (bolt-on), with a 500mm spacing. They are installed in pairs to secure the mast at two points. Made of steel and highly resistant to corrosion, thanks to its dual treatment of galvanizing and reactive sealing (RPR).
Vulcanizing
Weatherproofing Kit for Connectors and Splices, includes butyl rubber and PVC tape, 221213
Andrew
Ref.: 221213
€12.60
Kit of sealing and weather protection elements for connectors and joints. It consists of 5 rolls of butyl rubber and three rolls of PVC tapes of various sizes.