Markets
€50.00
Trays to support equipment on guides mounted on the side of the profiles, the trays are ventilated for air circulation for proper cooling, these trays can be mounted on our rack models,
Filters-Combiners
Diplexer, DCS 1800/UMTS 2100, dc pass on UMTS port, E11F05P98
Andrew
Ref.: E11F05P98
€181.43
Diplexer, DCS 1800/UMTS 2100, AISG protocol compatible, DC pass on UMTS port. DIN7/16" connector
PORT 2 1710-1880MHz
Port 1 1920-2170MHz
DCS 1800, Band Pass IMT 2100, Band Pass
NEWBOX divisors and accessories
Divider KIT for conductive boxes 5420.G2.180
Wolfgang Warmbier
Ref.: 5420.G2.180
€42.62
• Permanent conductive polypropylene
• For standard 600x400mm stackable boxes
• Criss-cross comb shape
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
• Custom configurable
€27.00
Front fixing equipment support trays at 19" in 2U height, available in 300 mm and 400 mm depths. They are ventilated and are universal in size, supporting up to 30Kg of weight. They can be mounted in any cabinet on the market.
NEWBOX divisors and accessories
Divider KIT for conductive boxes 5420.G2.120
Wolfgang Warmbier
Ref.: 5420.G2.120
€40.31
• Permanent conductive polypropylene
• For standard 600x400mm stackable boxes
• Criss-cross comb shape
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
• Custom configurable
€3.73
SMB coaxial connector (50 Ohm), straight, male hex flanged bulkhead, solder-end type assembly
€136.77
Continuous bracelet grounding monitor with a 10 mm clasp
Operation with 9Vdc battery
Audible and visible
Test method: capacitive impedance measurement
Test range: 1M ohm ...(100 pF + 2 MOhm) OK
HI-Fail > 5 Mohm
LO-Fail < 400 kohm
€15.43
Type N Male Right Angle Positive Stop™ for 1/2 in LDF4-50A cable, L4NR-PS
€55.00
Removable and depth-adjustable equipment support trays in 19” format for mounting on the front and rear profiles in a height-adjustable unit. The lugs allow us to modify the depth by 150 mm. This model is Universal and can be mounted on any closet on the market.
NEWBOX stackable boxes
KIT of dividers for conductive boxes 5420.G2.80
Wolfgang Warmbier
Ref.: 5420.G2.80
€33.08
• Permanent conductive polypropylene
• For standard 600x400mm stackable boxes
• Criss-cross comb shape
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
• Custom configurable
€146.00
Continuous bracelet grounding monitor with a 10 mm clasp
Operation with 9Vdc battery
Audible and visible
Sucko ground connection plug.
Test method: capacitive impedance measurement
Test range: 1M ohm ...(100 pF + 2 MOhm) OK
HI-Fail > 5 Mohm
LO-Fail < 400 kohm
Hybrid Matrix
4x4 Hybrid Array, Low PIM, 555–2700 MHz, H-4X4-CPUSE-NAI6
Andrew
Ref.: H-4X4-CPUSE-NAI6
€498.34
4x4 hybrid array, low PIM, high power with N female connectorization, Bandwidth: 555–2700 MHz.
3rd Order IMD -160 dBc
€20.00
DIN rail in 19 “format for rail mounting of electrical elements.
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5401.0253
Wolfgang Warmbier
Ref.: 5401.0253
€1.78
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5401.0353
Wolfgang Warmbier
Ref.: 5401.0353
€2.83
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
€16.27
Straight female N series coaxial connector for 1/4" cable type LDF1-50
Downloaders
Lambda/4 surge arrester with DC pass-through, DIN-7/16" male/female, APTDC-BDFDM-DB
Andrew
Ref.: APTDC-BDFDM-DB
€65.00
Hybrid surge arrester (Lambda/4 with built-in gas capsule for DC pass-through). DIN type connector 7/16" male / female bulkhead
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5425.0353.0553.PE
Wolfgang Warmbier
Ref.: 5425.0353.0553.PE
€5.25
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
N Series
Positive Lock angled male N connector for 1/4" LDF1-50 cable, ref L1TNR-PL
Andrew
Ref.: L1TNR-PL
€22.00
Coaxial connector type N-50Ohm male 90º angled, Positive Lock, for corrugated cable 1/4"R type LDF1-50
NEWBOX divisors and accessories
Horizontal divider for conductive boxes 5425.0253.0353.PE
Wolfgang Warmbier
Ref.: 5425.0253.0353.PE
€3.83
• Permanent conductive polypropylene
• For standard 600x400mm and 400x300mm stackable boxes
• Sheet thickness of 3mm
• Sheet weight of 550gr/m2
• High mechanical resistance
In-Building Antennas
CMAX-DMF-43-WI53, Low PIM Directional Antenna, MIM, 698–960 MHz, 1695–2700 MHz and...
Andrew
Ref.: CMAX-DMF-43-WI53
€213.25
Directional panel antenna for Indoor, low PIM, 2x2 MIMO, 698–960 MHz, 1695–2700 MHz and 3300-4200MHz; connectors 4.3-10.
Installation hardware included.
€60.73
HELIAX® FTTA fiber optic cable, 2 single-mode fibers, 5 mm LSZH armored cable. Connector 1 Duplex LC, Connector 2 Duplex LC, L=50 meters
€53.08
• Made of conductive polypropylene with permanent carbon charge.
• Half euro pallet with size 800 x 600 x 150 mm
• Perforated support surface
• Stackable
• 3 rows of studs
• Dynamic load up to 400 kg
• Static load up to 800 kg
• Weight 3.8 kg
• ESD symbol
€24.41
Straight 4.3-10 Male to 4.3-10 Female Coaxial Adapter
€132.69
132• Permanent, conductive polypropylene, carbon lined
• The pallet can be reinforced with 3 galvanized metal bars
• Europallet measurements 1200 x 800 x 150 mm
• Static load up to 4000 kg
• Dynamic load up to 1000 kg
• ESD symbol
• Stackable
• Weight: 11 kg
• 7mm frame
• Shelf load without bar reinforcement: 400 kg, with bars: 800 kg
€22.84
N Female to NEX10 Male Coaxial Adapter, Straight, Aerial
€148.62
• Dimensions: 1200x 800x 155mm
• Made of black conductive polypropylene (with graphite)
• Euro pallet 1200 x 800mm
• Maximum static load of 7500Kg
• Dynamic load of 2500Kg
• Smooth surface with frame, valid for stackable sides 5395.AR
• Weight approx. 15Kg
• ESD symbol
• Shelf load: 500 kg
€25.58
N female to NEX10 female coaxial adapter, straight, aerial
Jumpers
Jumper SureFlex® 1/4"S connector NEX10 Male to 4.3- 10 Male, 2m - F1A-XMHM-2M-P
Andrew
Ref.: F1A-XMHM-2M-P
€40.89
Jumper SureFlex® 1/4" Superflexible cable with NEX10 male straight to 4.3-10 male straight connectors, Length 2 Meters
€112.92
• Variable height of stackable frames
• Frames with 4 corner hinges
• PS conductive material with graphite
• Dimensions: 1200x800x200mm
• Weight: 5.2Kg approx.
• Marked with ESD symbol
• Valid for transport pallets 5395.PAL AND 5395.800
€479.41
Ventev's TerraWave 2.4/5GHz 8/6.5 dbi high-density multi-input multiple-output (MIMO) directional Wi-Fi antenna is optimized to work with Ventev's MR 66/72/74/84 access points. Meraki. The antenna gain and narrow beamwidths meet modern users' demand for high-capacity connectivity. The 4-wire dual-band offers exceptional performance and alleviates the need...
€83.00
MEASUREMENTS: 620 x 420 x 160 mm (L x A x H)
• Strong and durable frame made of conductive polypropylene
• Designed for the transport of stackable containers (1 x 600x400 mm or 2 x 400x300 mm)
• Includes 4 swivel wheels of 100 mm diameter, 2 of them with brakes
• Smooth and quiet operation
• Supported weight of up to 125 kg with the load evenly...
Jumpers
F4A-HMDM-5M-P Jumper Heliax® SureFlex® 1/2"S superflex 4.3-10 - 7/16
Andrew
Ref.: F4A-HMDM-5M-P
€22.15
HELIAX® 1/2"S Superflexible SureFlex® Low PIM jumper with 4.3-10 male to 7/16 male connectors
€11.31
Click-on type clamp for two 9–12 mm coaxial cables, it has a central hole for the passage of an M8 stud. The package contains 10 units
€39.55
H-MTD Automotive Cable Assembled, H-MTD Female Straight - H-MTD Female Straight 3000mm, Neutral Housing
€1.94
Gripping clamp for staples with M8 entries. Galvanized iron