Resistor box, SRM and Metriso meter tester.
Resistor box, SRM and Metriso meter tester.
Resistor box, SRM and Metriso meter tester.
Resistor box, SRM and Metriso meter tester.

Resistor box, SRM and Metriso meter tester.

7100.VB2

There are not enough units in stock
€143.69
Tax excluded

Check box for surface resistance meter.

• The Veribox box contains resistors for verification of the meter before use.

• 3 different resistors with 3 separate connections.

 
46298
7100.VB2

Product consultation

Please provide us with your details so that we can send you the requested information.

No reviews

16 other products in the same category:

Electrode for measuring ESD chairs.
Resistor

Electrode for measuring ESD chairs.

Wolfgang Warmbier
46608

Ref.: 7220.900

€700.00
double electrode for measuring ESD chair backs • To measure the resistance of the ground backup • Made with conductive rubber and silver particles R < 5 Ohm • Insulated handle • 4mm banana connection • Each probe can be connected separately
View
Electrode according to IEC61340 standard for checking resistances.
Resistor

Electrode according to IEC61340 standard for checking resistances.

Wolfgang Warmbier
6359

Ref.: 7220.850

€166.15
Electrode for checking resistance, with weight and surface according to standard. • For ground resistance and point-to-point measurement • Point-to-point and point-to-ground resistance measurements. • Electrodes fitted with conductive silicone rubber. • ø 63.5mm • 2.27 Kg. weight. • Insulating handle complies with IEC 61340-4-1 standard IEC...
View
Set of two electrodes according to IEC61340 standard for resistance testing.
Resistor

Set of two electrodes according to IEC61340 standard for resistance testing.

Wolfgang Warmbier
23196

Ref.: 7220.860

€266.62
Double probe for measuring surfaces with Metriso. • For point-to-point and ground resistance measurement with a distance between electrodes of 30cm • Must be connected to a high resistance meter. • Conductive rubber (R < 5 Ohm) with silver particles • Weight 950 g • Dimensions: 385 x 85 x 70mm (L x W x H) • Contact rubber: Ø 63.5 mm • Includes...
View
Metriso B530 resistance meter (Instrument Only).
Resistor

Metriso B530 resistance meter (Instrument Only).

Wolfgang Warmbier
38631

Ref.: 7100.B530.G

€1,013.08
METRISO® B530 basic. instrument only. Digital resistance meter • Valid for Pto to Pto and ground resistance measurements • Voltage and current measurements • Ohmic Range: 1 mA ≤ I ≤ 1.3 mA • Voltage ranges: DC 10 volts,100 volts and 500 volts • Test Ranges: 1 Ohm to 9.99KOhm 1kOhm to 199GOhm • Powered by batteries • Complies with IEC 61340-4-1,...
View
SRM200 resistance meter (Instrument only).
Resistor

SRM200 resistance meter (Instrument only).

Wolfgang Warmbier
6070

Ref.: 7100.SRM110.A

€284.62
Pocket surface resistance meter with LCD display. Includes conductive carrying case, grounding cable, USB cable, calibration certificate and software for reading and storing test data. • Range: 103 - 1012 Ohm • Voltage: open circuit with voltage of 100 V (automatic ignition above  1 MOhm) • Operation: batteries • Display: LCD-Display • Probes:...
View
Triangular probe for soil measurement according to UNE1081 Standard.
Resistor

Triangular probe for soil measurement according to UNE1081 Standard.

Wolfgang Warmbier
13481

Ref.: 7220.1081

€304.62
Triangular probe for soil measurement according to UNE1081 standard. accessory for metriso2000. • Triple electrode according to EN1081 standard, for measuring ground resistance in relation to personnel safety. • For measuring surface, vertical and ground resistance according to EN 1081 standard. • Weight 500gr. • Rubber supports: Shore 50-70 IRHD •...
View
Clamp-probe for resistance measurement in textiles.
Resistor

Clamp-probe for resistance measurement in textiles.

Wolfgang Warmbier
38828

Ref.: 7220.CL.49

€147.69
Stainless steel clamp probe for point-to-point resistance measurement, kit of two pcs. • Probe for measuring resistance pt by pt • Contact surface made of 50x25mm stainless steel • Clamp that ensures good contact • Connection: 4mm banana socket complies with IEC 61340-4-9
View
Probe-electrode for measuring ESD gloves.
Resistor

Probe-electrode for measuring ESD gloves.

Wolfgang Warmbier
40396

Ref.: 7220.15

€159.85
Electrode probe for measuring and checking ESD gloves. accessory for Metriso3000. For measuring the ground resistance of gloves and finger cots. • Pressure and constant area electrode. (CAFE) according to ANSI-ESDA STM 15.1 standard • Dimensions: 130 x 80 x 40 mm (L x W x H) • Weight: 460 gr.
View
SRM110 resistance meter (Instrument only).
Resistor

SRM110 resistance meter (Instrument only).

Wolfgang Warmbier
25372

Ref.: 7100.SRM200.K

€596.15
Surface resistance meter, bracelets and grounding cords. Pocket size, lightweight, surface resistance meter. • Measurement range: 103 - 1012 Ohm • Measurement voltage: open circuit with voltage of 100 V • Operation: battery operated. • Screen: 12 LEDs • Tester: Crimped metal electrodes (possibility of connecting 2 external waves)
View
Set of probes for measuring the surface resistance of materials.
Resistor

Set of probes for measuring the surface resistance of materials.

Wolfgang Warmbier
39796

Ref.: 7220.830.SET

€760.00
Pressure electrode probe model 830, two contacts, circular and concentric. • Lightweight universal probe for ground resistance measurements, point-to-point measurements, surface resistances and volume resistance measurements. • Conductive rubber (R<5 Ohm) with silver particles • Circular shape – Concentric ring probe with magnetically...
View
Product added to wishlist
Product added to compare.